Driver is the most important component of LED luminaire, its quality is directly related to the performance and quality of the luminaire. As the LED lighting manufacturers and importers’ production and procurement are in large quantities, the traditional LED driver tester has been unable to meet the demand. As per the requirement of customers, Lisun developed the LEDRACK-100W192P LED Aging Rack. It is applied to the production line for the finished products testing. This system fully complies with the requirements of IEC62384, GB24825-2009 and other relative standards. Please refer the picture below.
LEDRACK-100W192P LED Aging Rack
The LED Driver Aging Rack includes three parts: LED Driver Aging Rack, Aging Control System (includes PC & software) and LED Load Module. The specification is as following.
• Application range: LED driver and multi channel driver power aging. It has equipped with computer operation and monitor system. The working condition can be set by the computer, and the computer will record real time data to do statistical analysis.
• The parameters of load can be set freely on the software, to monitor the real time voltage, current, and power etc
• Load mode: CC, CV, CR, CP, and LED
• The channels are parallel connected under arbitrary load mode, which can allow product power expansion
• Aging Control System includes: ON/OFF control signal output; Signal of relay switch control; K type thermocouple temperature acquisition
• Automatic current switching function (optional)
• AC power meter to measure modules, and test power input characteristics (optional)
• Temperature monitoring function at product zone (optional)
• PWM dimming and two sets of logic control signal function (optional)
• The LED Driver Aging rack will design according to customer’s LED driver power and aging quantity per time
Welcome to contact us for more details.
Post time: 04/07/2017