Electrodynamic Vibration Generator System is complied with IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 etc. Full-function computer control, connect computer to do control, store, record and print function.
• Function: Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logarithm, High Acceleration speed, Amplitude Modulation, Time Control, Full-function Computer Control, simple and easy to set the acceleration and amplitude.
• Vibration table combined Vertical table and horizontal table in one set
• Maximum test load Capacity: 100KG
• Frequency Modulation function: any frequency must be in the frequency range (maximum acceleration speed <20g; maximum amplitude <5mm)
• Sweep Frequency function (0.01 Hz): (Upper frequency, Lower frequency, Time range) It can set real standard arbitrarily to sweep frequency back and forth
• Programmable Function (0.01Hz): It can set each segment in 15 segments arbitrarily (frequency/amplitude/time/acceleration), and it can be recycled
• Frequency doubling function (0.01 Hz): 15 segments multiplied-increase: 1. Low to high frequency; 2. High to low frequency; 3. Low to high and then to low frequency, it can be recycled
• Logarithmic function (0.01 Hz), 3 modes of logarithm/can be recycled:
A. Lower to upper frequency
B. Upper to lower frequency
C. Lower to upper and then to lower frequency
• Vibration: 0~5mm (Adjustable range P-P). Vibration waveform: sine wave. Maximum acceleration speed: 20g
• Accuracy: Frequency can be displayed to 0.01 Hz, Precision 0.1 Hz.
• Measuring instrument: To display amplitude, acceleration speed and the maximum acceleration speed.