Power Cord Bending Tester
  • Power Cord Bending Tester
Product No : SW-2
Product Name : Power Cord Bending Tester

Ralated Download

  • captcha

Product Detail


SW-2 Power cord bending tester is fully designed according to the IEC standard, and can also be costumer-sized depends on the samples’ type and the costumer’s requirement.

SW-2 2 Position type

SW-6 6 Position Type



  • Fully meets the requirements of IEC60335、IEC60598、GB7000 and GB4706.
  • Provide different type of fixtures. Each position can do the test independently.
  • Normal mode is 2 position type(For the test lab) and 6 Position (For the factory and production line). If necessary can be costumer-sized.



  • Power supply:AC220V 50/60HZ   12KVA
  • Control mode: PLC with touch screen and Servo motor.
  • Test Speed: 10~60times/min (Adjustable)
  • Test Degree: 0~540° (Adjustable)
  • Counter: 0~999999 (Can be pre-set)
  • Weight: 5N,10N,20N. 2Sets. (6Position type will have 6 Sets)
  • Position: 2/6
  • Load Current: 0~20A (Adjustable)
  • Angle plate: Can check the test situation
  • Sample fixture: Can be costumer-sized.
  • Can do power line bending test (The User need prepare sample and power supply ), Can record the number of the sample’s work with load.

Related Products

  • Pull out device
    Pull out device
  • 3 Position Plug Socket Switch Life Tester
    3 Position Plug Socket Switch Life Tester
  • 6 Position Plug Socket Switch Life Tester
    6 Position Plug Socket Switch Life Tester
  • Load cabinet
    Load cabinet
  • Low-temperature impact device
    Low-temperature impact device
  • Contact Pressure Drop Test Device
    Contact Pressure Drop Test Device
  • Wire Damaged Tester
    Wire Damaged Tester
  • Temperature Rise Tester
    Temperature Rise Tester