Tabletop spectrophotometer DSCD-920 has the advantage of excellent inter-instrument agreement, high accuracy and good replicability. It could meet your requirement for both color quality control and color matching very easily.
It could get the measurement sample data and internal environment data at the same time to make sure the testing accuracy and stability for long time running.
Adopt D/8 illuminant condition recommended by the CIE to meet the color testing requirement for different industries. It could measure with SCI and SCE to see the color data change more clearly.
It is easy to adjust the testing calibers. The largest caliber diameter reaches 25.4mm. It could test the sample with different sizes.
|Measurement Condition||Reflection: d/8 (Diffused lighting, 8 degrees receiving) Compatible with SCI/SCE Measurement ISO7724/1、DIN5033 Teil7、JIS Z8722 condition C、CIE No.15、ASTM E1164 Transmission d/0 (Diffused lighting, Vertical direction receiving)|
|Size of integrating sphere||Φ15.2cm, Alvan diffused reflection surface coating|
|Illumination Light source||CLEDs (entire wavelength balanced LED light source)|
|Sensor||dual light path sensor array|
|Half spectral width||5nm|
|Measurement light source||A, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, CWF, U30, DLF, NBF, TL83, TL84|
|Data being displayed||SPD distribution/data, sample’s color values, color difference values/graph, pass/fail results, color error tendency, history data color simulation, manual input standard sample, generate measurement report|
|Measurement time interval||2 seconds|
|Large Aperture (LAV): 2.54cm (=1inch)|
|Medium Aperture (MAV): 1.5cm (=0.6inch)|
|Small Aperture (SAV): 0.75cm x 1.0cm (0.3inch x 0.4inch)|
|Very Small Aperture (VSAV): 0.3cm x 0.8cm (0.12inch x 0.31inch)|
|Color space||CIE-L*a*b, L*C*h, CIE-L*u*v, XYZ, Yxy, Transmittance, Hunterlab, Munsell MI, CMYK, RGB, HSB|
|Color difference formulas||ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc (2:1), ΔE*cmc (1:1), ΔE*94, ΔE*00, ΔEab (Hunter), 555color classification|
|Other colorimetric indices||WI (ASTM E313-10, ASTM E313-73, CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby), YI (ASTM D1925, ASTM E313-00, ASTM E313-73), Tint (ASTME313-00, CIE, Ganz), Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner|
|Repeatability||light splitting reflectivity: standard deviation within 0.08%|
|color values: ΔE*ab <=0.015 (After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03)|
|Data storage||mass storage|
|Light source longevity||5 years, 1.5 million tests|
|Work temperature range||15℃-32℃ (60°F-90°F)|
|Relative Humidity||0℃ to 45℃, relative humidity 80% or below (at 35°C), no condensation|
|Standard accessories||AC power line, color management software, drive software, USB cable, black/white calibration tube, 40*10 cuvette, cuvette support, testing report|