• New Design 3m Electric Integrating Sphere

    • It has all functions of IS-*MA Integrating Sphere with Holder Base. • Lisun engineers add the infrared anti-pinch device (the video please come to the “video” tab) and the cross laser positioning device in the integrating sphere. • Please refer to article The New Design 3m Electric Integrating Sphere for more information. According to requirement of IEC standards, the standard test temperature is 25℃, but high power lamps such as HID lamps and LED…

    send inquiry
    • captcha
  • Ring Wave Generator

    Ring Wave Generator is the test equipment in conformity to IEC (the International Electro technical Commission) standard IEC61000-4-12, EN61000-4-12, ANSI-C62-41 and GB/T17626.12. This instrument is used for the simulative electrical network, the power supply of the reactive load and the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or…

    send inquiry
    • captcha
  • Composite Salt Spray Test Chamber

    Composite Salt Spray Test Chamber stimulate the actual natural conditions to do accelerated corrosion test, all the testing are based on common states on the natural environmental: such as combine with salt spray, hot air drying, humidity, low temperature and so on. The test samples are widely used on the intense changes in the environment, like automobile parts, aviation equipment, building materials, coating, electric and electrical machinery so on. YWX/Q-150X series…

    send inquiry
    • captcha
  • Voltage Dips and Interruptions Generator

    The voltage dip and interruptions generator is specially designed according to the characteristics and requirements of EMS measurement under a sudden reduction or interruption of the voltage at a point, CSS61000-11/ CSS61000-11T used a big LCD in both English and Chinese operating interface. They have more fine performance such as high reliability, convenient operation, and full meet the standard requirements of IEC 61000-4-11, EN 61000-4-11 and GB/T17626.11 Specifications: Product Model…

    send inquiry
    • captcha
  • Compact Goniophotometer

    The compact goniophotometer of LSG-1200A is used to measure the luminous intensity distribution curve, intensity data, spread angle and other parameters for Chip LED, LED Module, LED Spotlight and all other light which beam angle is no more than 180 degree. Option Function: The LSG-1200A can work with a Digital Power Meter (LS2012 DC & AC Power Meter or LS2010 Harmonic Analyzer) and LSP-500VA AC Power Source. Specification: • Meets the requirements of IEC, CIE and…

    send inquiry
    • captcha
  • High Precision Rotation Luminaire Goniospectroradiometer

    LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribution test. It is for industrial laboratory measurements the photometric data of luminaires such as LED luminaries, HID lamps, fluorescent lamps and so on. Measurement: Luminous Intensity Data, Luminous Intensity Distribution, Zonal Luminous Flux, Luminaries Efficiency, Luminance Distribution,…

    send inquiry
    • captcha
  • Salt Spray Test Machine

    The Salt Spray Test Machine/Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 590x470x400 1070x800x1050 1Phase/220V 2.5 YWX/Q-250 1000x640x500 1400x870x1150 1Phase/220V 3.5 YWX/Q-750 1100x750x500 1680x1030x1260 1Phase/220V 4.5 YWX/Q-010 1300x1000x600 2000x1160x1390 3Phase/380V 6.5 YWX/Q-016 1600x900x720 2320x1280x1500 3Phase/380V 9.5 YWX/Q-020 2000x1000x800 2530x1220x1410 3Phase/380V 11…

    send inquiry
    • captcha
  • Electrodynamic Vibration Generator System

    Electrodynamic Vibration Generator System is complied with IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 etc. Full-function computer control, connect computer to do control, store, record and print function. Specification: • Function: Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logarithm, High Acceleration speed, Amplitude Modulation, Time Control, Full-function Computer Control, simple and easy to set the acceleration and amplitude. • Vibration table combined Vertical table and horizontal table in one set • Maximum test load…

    send inquiry
    • captcha
  • High Power LED Aging Tester

    High Power LED Aging Test is designed to measure the aging & life of 64pcs power LEDs products simultaneously and separately, such as 1W, 3W, 5W LED. Two drive methods available: constant current drive and impact pulse drive: one current value sent in a separate group with 8pcs products; output frequency and duty ratio free set for impact pulse drive mode. Specification: • The standard LS600 has 1 Group which has…

    send inquiry
    • captcha
  • Ball Pressure Test Device

    Made up by the related item according to IEC60695, IEC884-1, GB/T5169.21-2006, GB4706.1-2005, GB2099.1-2008, etc. • R = 2.5mm Pressure: 20N • Base with thermocouple hole • Material: 304 stainless steel

    send inquiry
    • captcha
  • Current Transformer Tester

    Characteristics: • Full-featured, can not only satisfy various CT (eg: protection, measurement and TP category) but also PT type electromagnetic unit for its excitation characteristics (ie voltage current characteristics), ratio, polarity, secondary winding resistance, secondary load, ratio deviation, angle deviation and other test requirements. • Automatically gives the knee point voltage / current, 10% (5%) error curve, accurate limit factor (ALF), instrument security factor (FS), secondary time constant (Ts), remanence coefficient (Kr),…

    send inquiry
    • captcha
  • Standard Test Finger

    It with Protection against electric shock device. It according to IEC60335, IEC60884, IEC61032, IEC60529, IEC60065, IEC60035, IEC60950, EN60529, EN60950, GB4706, GB7000, GB9706, UL507, VDE0470, etc.

    send inquiry
    • captcha