• Transient Over-voltages Tester

    The SUG335 is a 1.2/50μs surge voltage tester, with the virtual front time of 1.2ms and a virtual time to half-value of 50ms. The standard voltage waveform complies with the IEC 60335, IEC 62052-11: 2003, IEC 61008-1: 1996, IEC 61009-1:1996 and IEC 60947-1: 1995, IEC60060, IEC1036 surge voltage test and has been used for safety testing to determine if the clearance was fulfilled the safety requirement while the transient voltage…

    send inquiry
    • captcha
  • UV aging test Chamber

      UV aging test Chamber is designed for evaluating the resistant performance of non-metallic materials, organic materials (plastics, paints, coatings, rubbers, etc.) under the specified conditions such as sunlight, temperature, and other climatic conditions. It creates a man-made testing environment imitating the natural light source such as sunlight and other damages in the nature, such as rain and dew damage, to impose on the materials and to assess the degree…

    send inquiry
    • captcha
  • AC Power Supply

    AC-DC-AC frequency conversion technology, Controlled & tested by 16 bits MCU Protection for over hot, thundering voltage and current Total voltage distortion: ≤0.6%; Voltage stability: ≤0.1%/30min Load adjust rate: ≤0.1%; Frequency stability: ≤0.05%/30min Output voltage range: AC 0.0~300.0V, Output Frequency Range: 45~70Hz, 100Hz, 200Hz and 400Hz Input Power: single phase 220V and 50/60Hz (other input spec can be option) Communicate with PC via software, the Voltage & Current set by…

    send inquiry
    • captcha
  • Pull out device

    This Pull out device BCL-1 is designed and manufactured according to relevant standard requirements of IEC884-1/ GB2099.1-2008 and other electrical accessories standards, Mainly used to test the needed maximum force when the plug pull out from socket and the minimum force when single stage plug pull out from socket, and to inspect whether the socket can withstand the lateral stress imposed by electric plug into the socket. This device is…

    send inquiry
    • captcha
  • Transistor’s Multi-Functional Selector

    • Measure parameters: 1) β (0~99) 2) Switching time T (0.01μs~99.9μs), including Tr, Ts, Tf 3) VCES (0~2V), VBE (0~2V) 4) Leakage current ICEO (0.1μA~3mA) 5) Withstand voltage BVCEO (50V~650V) • Pre-set grouping values for T & β, selector can display group number and alarm when being measured. Values of VCES, VBE, ICEO and BVCEO exceed the limit, meanwhile indicating the unqualified item • Freely adjust or set the testing conditions according to requirement. 1) Three different Ib currents…

    send inquiry
    • captcha
  • 3 Position Plug Socket Switch Life Tester

    It is designed according to terms and conditions of IEC60884-1, IEC60669-1, GB2099.1-2008 and GB16915.1-2003, for life test of plug and socket and switch products of household and similar use appliances. The device can connect with matched load cabinet, in order to conduct a test of electrical life, normal operation and breaking capacity. The equipment provides some clamps. It can test plug and socket production, wall switch, rocker switch, dial plate…

    send inquiry
    • captcha
  • 6 Position Plug Socket Switch Life Tester

    It is designed according to terms and conditions of IEC60884-1, IEC60669-1, GB2099.1-2008 and GB16915.1-2003, for life test of plug and socket and switch products of household and similar use appliances. The device can connect with matched load cabinet, in order to conduct a test of electrical life, normal operation and breaking capacity. The equipment provide some clamp, it can test plug and socket production, wall switch, rocker switch, dial plate…

    send inquiry
    • captcha
  • Dustproof Testing Machine

    The Dustproof Test Chamber SC-015 is according to IEC60529, GB2423.37-89 (Test L: dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps), DIN40050 and IP5K0. The SC-015 is applied in LED or other luminaries for IP5X and IP6X test.   Model Number Working Room Size (mm) Remark SC-500 700*800*900 Single door structure SC-800 800*800*800 SC-010…

    send inquiry
    • captcha
  • Load cabinet

    • Working power: AC220V 50Hz • Normal load: Continuous adjustable from 0 to 280V • Electric current: 0~20A/Continuos adjustable  cosφ: 0.3-0.96 under 16A; 0.6~0.96 more than 16A • Precision: 0.5 class, digital display • Counter: 0~999999 times, can be preset Production Model Standards Specifications Load cabinet DFX-20 UL1054, GB2099, GB15092 Provide the required inductive and resistive load for electrical accessory test; 0~20A Power factor 0.3-0.98 Load cabinet DFX-30 UL1054, GB2099,…

    send inquiry
    • captcha
  • Low-temperature impact device

    This low-temperature impact device is compliance with standard requirement of IEC60245, IEC60227, IEC60540, GB5013-2008, GB5023-2008 and GBT2951-2008. It’s used to test all kinds of PVC sheathed cable, wire, soft wire and no sheath of parallel soft PVC insulated impact resistance at low temperature. Specification: • Working temperature: -15℃±1℃ • Impact height: 10~200mm adjustable • Length of specimen: 5D~150D • Material: 304 stainless steel • Completion time once: 3~5s • Completion…

    send inquiry
    • captcha
  • Contact Pressure Drop Test Device

    This machine is designed according to relevant requirements of IEC60884-1, IEC60669-1, GB2099.1 and GB16915.1, used to test contact pressure drop of socket unthreaded terminal and non-removable plug after finish bending test. Specification: • Test current: AC 1~100A • The measurement range of pressure drop: 0~199.9±1mv • Working voltage: AC 220V 50HZ 5A

    send inquiry
    • captcha
  • Wire Damaged Tester

    This equipment is designed and manufactured according to corresponding regulation in standard IEC884-1, GB299.1-96, GB16915.1-97 and other electronic accessories relevant standard. Mainly used to test damage degree of fixed connection components lead wire of with thread clamping type and no screw terminals, so as to inspect whether it can withstand mechanical stress during normal use. Specification: • Power supply: AC220V 50Hz • Test rate: 10±2r/min (GB16915.1-97: 12 ±1r/min) • Rotating…

    send inquiry
    • captcha