الدردشة عبر الإنترنت

+8615317905991

Pure Sine Wave AC Power Source (High Precision)

رقم المنتج:

ترك رسالة

=

Pure Sine Wave AC Power Source (High Precision)

ترك رسالة

=
وصف المنتج

The LSP-500VARC High Precision Pure Sine Wave AC Power Supply has the characteristics of good output waveforms, low harmonic, high accuracy, integrated source and meter. With output short-circuit, over-current, over-voltage, over-power, over-temperature alarm protection functions. It can communicate with LISUN LSG series goniophotometer, LPCE-2 high precision integrating sphere spectroradiometer system, LSRF-3 Lamp Start, Run-up Time and Flicker Test System و LS2090 LED Power Driver Tester via RS-232/RS-485 interface.

نموذجLSP-500VARCLSP-500VARC-PstLSP-1KVARCLSP-1KVARC-Pst
Output Voltage/PhaseSingle phase: 2V-150V/2V-300V
2-150V Max. Current4.2A4.2A8.4A8.4A
2-300V Max. Current2.1A2.1A4.2A4.2A
Output  Frequency Range45.00~65.00Hz
Frequency Stability≤0.05%/30min
Total Harmonic Distortion≤0.3 % (No load or full load with resistive load)
Voltage Stability≤0.1%/30min
Equivalent Resistance≤0.1(Zero internal resistance design)
Power Supply Efficiency>40%
Load Effect≤0.1%
Communication PortRS232/RS485
Test ParametersVoltage, Current, Power, PF, Frequency
Voltage Range55V/220V
Voltage Resolution0.1V
Voltage Accuracy±(0.4% rdg+0.2%rng+1digital)
Current Range0.2A/2A
Current Resolution0.001A
Current Accuracy±(0.4% rdg+0.2%rng+1digital)
Power Resolution0.1W
Power Accuracy±(0.4% rdg+0.2%rng+1digital)

P.S. LSP-500VARC and LSP-1KVARC are the update versions with big LCD screen. The LSP-500VARC-Pst and LSP-1KVARC-Pst are according to IEC TR 61547-1:2020, IEC61000-3-3, IEC 61000-4-15 and IEEE 1453 Pst programmable function. It can work with LISUN LSRF-3 Lamp Start, Run-up Time and Flicker Test System to test Pst LM(I) parameter.

معيار:
IEC Technical Report 61547-1 “Equipment for general lighting purposes – EMC immunity requirements – Part 1: Objective light flickermeter and voltage fluctuation immunity test method”
IEC61000-3-3 “Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection”
IEC 61000-4-15 “Electromagnetic compatibility (EMC) – Part 4-15: Testing and measurement techniques – Flickermeter – Functional and design specifications”
IEEE 1453 “IEEE Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems”

Programmable AC Power Signal Output when do Flicker dynamic Pst LM(I) test in IEC TR 61547-1:2020

arAR