IEC61032:1997 Test Probe D IP4X Test Rod 1.0 mm

Grundlegende Einführung:
1. According to: GB/T4208-2008 / IEC61032:1997 / IEC60529:2001 / IEC60065 / IEC60598 and UL
2. Die IP4X-Testsonde D (Testsonde D) ist das notwendige Werkzeug, um die Prüfung des Schutzes vor elektrischem Schlag bei Haushaltsgeräten und ähnlichen elektrischen Geräten durchzuführen.

Technical parameter:
1. Test rod length: 100 mm
2. Test rod diameter: 1.0 mm
3. Durchmesser der kreisförmigen Prallplatte: 35 mm
4. Griffdurchmesser: 10 mm
5. Grifflänge: 100 mm
6. Gemäß IEC61032 Abbildung 4 (die Testsonde D).

Anwendung:
1. Standard test refers to the joint part can’t touch the live parts or close to the dangerous parts. and 35mm circular baffle can not be enter.
2. In the test requirement for preventing access to the hazardous parts. Test Probe D need to be with push force 1±0.1N.

Purpose:
This probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a tool.

Anmerkung:
For products without thrust, please use with a push-pull force gauge.

Standard:
IEC 61032 “Protection of persons and equipment by enclosures – Probes for verification”
IEC 60529 “Degrees of protection provided by enclosures (IP Code)”
IEC 60065 “Audio, video and similar electronic apparatus – Safety requirements”
IEC 60598-1 “Luminaires – Part 1: General requirements and tests”
UL, GB/T 4208