DSCD-950P Benchtop Spectrophotometer is an intelligent, convenient and high precise spectrophotometer. It adopts 7 inches touch screen, full-spectrum capability, and an Android operating system. Illumination modes include reflection D/8° and transmission D/0° (with UV inclusion/exclusion measurements). It offers accurate and stable color measurements, a large storage capacity, and robust expansion capabilities on the PC end, making it suitable for laboratory color analysis and communication.
Introduction:
• Adopts reflectance D/8° and transmittance D/0° geometry to measure both opaque and transparent materials.
• Dual Optical PathsSpectrum Analysis Technology
This technology can simultaneous access to both measurement and instrument internal environmental reference data to ensure instrument accuracy and long-term stability.
• Compatible with SCI/SCE measurement, Support SCI+SCE Measurement
Instrument adopts D/8 geometry which is highly recommends by CIE (International Commission on Illumination) to meet color measurement of different industries.It supports both SCI (specula component included) and SCE (specular component excluded) mode for better detect of color change.Fast SCI+SCE measurement, test time only need less than 4s.
• Rotatable Touch Screen with Android Operate System
Screen position and direction can be adjusted according to the instrument test methods.
Android Operate System
• Open Transmittance Measurement Area, no limit on sample size
• Different Kinds of Accessories for simple measurement
It contains 15 kinds of standard and 12 kinds of optional accessories to measure different kinds of materials
• Accessory Drawer to Protect and Store Accessories
• Switchable Reflectance Apertures
• Four Kinds of UV Test Modes for Fluorescence Material Measurement
Instrument Structure Introduction
Especificación:
Illumination/ Viewing System | Reflection: d/8(Diffused illumination, 8 degree viewing) Simultaneous measurement of SCI/SCE (ISO7724/1, CIE No.15, ASTM E1164, ASTM-D1003-07, DIN5033 Teil7, JIS Z8722 Condition C standard) Transmittance d/0(Diffused illumination, 0 degree viewing ) |
Sensor | Silicon Photodiode Array |
Grating Method | Concave Grating |
Diámetro de la esfera | 152mm |
Wavelength | 360-780nm |
Wavelength Pitch | 10nm |
Half Band Width | 5nm |
Reflectance Range Resolution | 0-200% 0.01% |
Light Source | Pulse Xenon Lamp and LED |
UV Measurement | Include UV, 400nm, 420nm, 460nm |
Tiempo de medición | SCI/SCE < 2s SCI+SCE < 4s |
Measurement Aperture | Reflection: |
Transmittance Sample Size | No limit on sample width and height, thickness ≤50mm |
Repetibilidad | XLAV Spectrum Reflectance/Transmittance: standard deviation within 0.1% |
Inter-Instrument Agreement | XLAV ΔE*ab 0.15 (BCRA Series II, Average measurement of 12 tiles, at 23℃) |
Illuminants | A, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, CWF, U30, DLF, NBF, TL83, TL84 |
Language | English, Russian, Spanish, Portuguese, Japanese, Thai, Korean, German, French, Polish, Chinese (simple and traditional), Indonesian |
Display | Spectral data, spectral graph, colorimetric data, color difference data, color difference graph, pass/fail judgment, simulated color, color evaluation, haze, liquid color, color deviation |
Viewing Angles | 2° and 10° |
Color Spaces | L*a*b, L*C*h, Hunter Lab, Yxy, XYZ |
Other Indices | WI(ASTM E313-00,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Stensby) YI(ASTM D1925, ASTM E313-00, ASTM E313-73), Tint(ASTM E313-00), Metamerism index milm, stain fastness, color fastness, ISO brightness, R457, A density, T density, E density, M Density, APHA/Pt-Co/Hazen, Gardner, Saybolt, ASTM color, Haze, Total Transmittance, Opacity, Color Strength |
Color Difference | ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc, ΔE*94, ΔE*00, ΔE*ab(hunter),555 shade sort |
Storage Memory | 8 GB U Disk for data storage and transfer |
Screen Size | 7 Inches Touch Screen |
Power | 12V/3A |
Operate Temperature | 5-40℃(40-104F), relative humidity 80% (at 35℃) no condensation |
Storage Temperature | -20-45℃(-4-113F), relative humidity 80% (at 35℃) no condensation |
Accessories | Power adapter, data cable, transmission fixture, USB flash drive (including management software), black chamber, white board, green board, 0% calibration light shielding cover, 30 mm aperture plate, 18 mm aperture plate, 11 mm aperture plate, 6 mm aperture plate, support table, cuvette, damping handle |
Optional Accessories | Heating Fixture for Transmittance, Vertical Support and Pneumatic ram for downward measurement, Reflectance fixture for small size sample, Reflectance Glass Cell Support, Corrosion-Resistant Protective Plate (non-removable), Sample Holder for Fiber, Film Fixture, Transmittance Fixture for Small Aperture, Trolley Case, European Standard Plug, American Standard Plug |
Interfaz | USB, USB-B and RS-232 |
Instrument Size | 465x240x260mm(L*W*H) |
Peso | 10.8KGS |
Other Function | 1. Camera to view measurement area; 2. Support horizontal, vertical and downward measurement method (need optional accessories to support for downward measurement); 3. Auto humidity and temperature compensation function. |
Estándar:
ISO 7724-1 “Paints and varnishes — Colorimetry”
CIE No.15 “Colorimetry”
ASTM E1164 “Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation”
ASTM D1003 “Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics”
DIN 5033-7 “Colorimetry; measuring conditions for object colours”
ASTM E313 “Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates”
ASTM D1925 “Test Method for Yellowness Index of Plastics”
JIS Z8722
Aplicaciones:
• Plastic Plate Color Measurement
Plastic Plate Color Measurement
• Powder Material Color Measurement
Powder Material Color Measurement
• Petroleum and Oil Color and Transmittance Measurement
Petroleum and Oil test
• Textile and Yarn Color Measurement
Textile and Yarn Color Measurement
• Master Batches and other Pellet Material Color Measurement
Master Batches and other Pellet Material Color Measurement
• Printing Ink and Packing Material Color Measurement
Master Batches and other Pellet Material Color Measurement
ES 
EN 
RU 
PT 
TR 
AR 
DE 
PL 
IT 
FR 
KO 
JA 
ID