During the tests using these gauges, shutters shall be held open.
The metallic parts of gauges A, B and C are made of hard corrosion-resistant metal (e.g. stainless steel).
An electrical indicator with a voltage not less than 40V and not more than 50 V is used to show contact.
The gauge A shall be introduced through the entry holes of the socket-contactassembly in every possible position until the plane XX is fully in contact with the engagement face.
The indicator shall not light.
The pins of gauges B and C shall be completely inserted. Then,
– for gauge B the indicator shall light;
– for gauge C the indicator shall not light.
IEC 60906-1 Figure 2
ID 
EN 
ES 
RU 
PT 
TR 
AR 
DE 
PL 
IT 
FR 
KO 
JA