1. Aplikasi:
This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to AS/NZS 3112: 2017 standards. And the mainly application industries is electronics, electrical appliances, plugs and sockets and other similar areas.
2. Fitur:
Dimensi pengukur, toleransi, material, kekerasan, kekasaran permukaan sesuai dengan persyaratan standar;
Kekerasan material lebih dari 50HRC; Koefisien muai panas material kecil, dimensi dan toleransi stabil dan dapat diandalkan.
3. Specifications:
| Model LISUN | Spesifikasi Produk |
| GNGPL-3131 | Depth of No-contact test gauge with AS/NZS 3112 Figure 3.1 |
| GNGPL-3136 | Device for checking the resistance to lateral strain (Three Pin Gauge) with AS/NZS 3112 Figure 3.6 |
| GNGPL-3137 | Device for checking the resistance to lateral strain (Two Pin Gauge) with AS/NZS 3112 Figure 3.7 |
| GNGPL-31A1 | Gauge for three –Pin Flat-Pin Plugs with AS/NZS 3112 Figure A1 |
| GNGPL-31B1 | Gauge for Two-Pin Flat-Pin Flat- Pin Plugs with Parallel Pins with AS/NZS 3112 Figure B1 |
| GNGPL-31C1 | Three-pin test plug with flat pins for full insertion test and the finger test during normal insertion test with AS/NZS 3112 Figure C1 |
| GNGPL-31D1 | Three-pin test plug with flat pins for abnormal insertion test. Figure D1 |
| GNGPL-31F1 | Plugs and socket-outlets for use in extra-low voltage circuits with AS/NZS 3112 Figure F1 |
| GNGPL-31G1 | Three-pin test plug with flat and round pins for the full-insertion test and test finger test during normal insertion test Figure G1 |
ID 
EN 
ES 
RU 
PT 
TR 
AR 
DE 
PL 
IT 
FR 
KO 
JA