Simulator ESD-883D HBM\/MM ESD<\/a> untuk menguji HBM, MM dan CDM pada saat yang bersamaan (model LISUN: ESD-883D\/ESD-CDM)<\/p>\nKonfigurasi Sistem:<\/strong>
\nSumber tegangan tinggi DC:<\/strong>
\na. Kisaran output tegangan: \u00b1 (10V ~ 5kV);
\nb. Kesalahan maksimum yang diijinkan dari output tegangan: \u00b1 (3% \u00d7 nilai pembacaan + 10V);<\/p>\nInstrumen utama:<\/strong>
\na. Isolasi pelat induksi tegangan tinggi untuk mencegah kebocoran tegangan tinggi;
\nb. \"Pelat induksi tegangan tinggi + pelat isolasi\" dapat disesuaikan dalam tiga arah, dengan rentang penyesuaian 0 ~ 10cm dan akurasi penyesuaian 0,1mm (penyesuaian manual);
\nc. Ukuran papan sensor: 12cm * 12cm * 2mm;
\nd. Ukuran papan isolasi: 12cm * 12cm * 0.4mm, bahan: FR4<\/p>\nProbe uji elektrostatik:<\/strong>
\na. Kemampuan pengukuran maksimum puncak pulsa arus pelepasan elektrostatis \u226520A;
\nb. Ukuran probe: \u03a61,5 * 10mm, panjang teleskopik: \u22483mm;
\nc. Probe uji dapat bergerak secara vertikal (kontrol program + kontrol manual), dengan kecepatan yang dapat disesuaikan 0,1 cm \/ s ~ 5cm \/ s
\nd. Bagian probe uji dilengkapi dengan attenuator, dan port\/saluran akuisisi data dibiarkan untuk koneksi langsung ke osiloskop
\ne. Ukuran bidang tanah: 63,5 mm * 63,5 mm * 6,35 mm<\/p>\n![\"Skema\"](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/11DJQ@YP8THXNCK6E.png\" "\\"\\"")
<\/p>\n
Skema<\/span><\/p>\n<\/div>\n![\"Diagram](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/Principle-reference-diagram-ANSI-ESDA-JEDEC-JS-002-2014.jpg\" "\\"\\"")
<\/p>\n
Diagram referensi prinsip (ANSI\/ESDA\/JEDEC JS-002-2014)<\/span><\/p>\n<\/div>\n![\"Skema\"](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/6JEXK2@SPA0WKUI3Y.png\" "\\"\\"")
<\/p>\n
Skema<\/span><\/p>\n<\/div>\n![\"Diagram](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/EVBWUICAICAQNAQP6O.png\" "\\"\\"")
<\/p>\n
Diagram rangkaian ekuivalen<\/span><\/p>\n<\/div>\n![\"Gambar](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/Test-probe-physical-reference-picture.jpg\" "\\"\\"")
<\/p>\n
Gambar Referensi Fisik Probe Uji<\/span><\/p>\n<\/div>\n![\"Gambar](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/Base-physical-picture.jpg\" "\\"\\"")
<\/p>\n
Gambar Fisik Dasar<\/span><\/p>\n<\/div>\n![\"\"](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/Schematic-diagram-of-three-dimensional-adjustment-of-the-base-reference.jpg\" "\\"\\"")
<\/p>\n
Diagram skematik penyesuaian tiga dimensi alas (referensi)<\/span><\/p>\n<\/div>\nProses Operasi Uji:<\/strong>
\n1. Tempatkan DUT pada papan insulasi, pasang perlengkapan, dan hadapkan pin ke atas;
\n2. Sesuaikan kenop tiga dimensi alas secara manual untuk membuat pin DUT berada di tengah;
\n3. Kontrol probe uji secara manual ke perpindahan maksimum, konfirmasikan bahwa probe telah bersentuhan dengan pin, lalu kembalikan posisinya;
\n4. Atur kecepatan gerakan probe ke nilai yang sesuai;
\n4. Nyalakan sumber tegangan tinggi ke XX volt untuk menempatkan DUT dalam kondisi bermuatan yang diinduksi secara elektrostatis;
\n5. Buat probe secara otomatis bergerak turun dengan cepat dan hubungi pin untuk menyelesaikan proses pelepasan CDM. Pada saat yang sama, data bentuk gelombang pelepasan dikirimkan ke osiloskop melalui kabel koaksial untuk ditampilkan dan disimpan.<\/p>\n![\"Diagram](\"https:\/\/www.lisungroup.com\/wp-content\/uploads\/2024\/06\/Schematic-diagram-of-the-test-operation-process.jpg\" "\\"\\"")
<\/p>\n
Diagram Skematik Proses Operasi Pengujian<\/span><\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"ESD-CDM ESD Guns for ICs Testing is specially designed for the characteristics and requirements of the electrostatic discharge immunity test of the Charged Device Model (CDM) discharge. It can test the electrostatic immunity of semiconductor devices such as LED chips, transistors and ICs. It is designed and manufactured in accordance with the requirements of the […]<\/p>\n","protected":false},"author":1,"featured_media":3233,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[571],"class_list":["post-2877","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","tag-esd-cdm"],"_links":{"self":[{"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/posts\/2877","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/comments?post=2877"}],"version-history":[{"count":0,"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/posts\/2877\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/media\/3233"}],"wp:attachment":[{"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/media?parent=2877"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/categories?post=2877"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ledphotometer.com\/id\/wp-json\/wp\/v2\/tags?post=2877"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}