{"id":2425,"date":"2025-06-19T19:35:47","date_gmt":"2025-06-19T11:35:47","guid":{"rendered":"https:\/\/www.ledphotometer.com\/blog\/led-driver-automatic-test-system\/"},"modified":"2025-06-27T11:44:01","modified_gmt":"2025-06-27T03:44:01","slug":"led-driver-automatic-test-system","status":"publish","type":"post","link":"https:\/\/www.ledphotometer.com\/it\/prodotti\/led-driver-automatic-test-system\/","title":{"rendered":"Sistema di test automatico per driver LED"},"content":{"rendered":"

ATE-2 LED driver automatic test equipment is applied to the production line for the finished products testing. With features of simplified operation and nice-looking, the workers can operate it at very short time. This system can meet the requirements of IEC62384<\/a>, GB24825-2009<\/a> and other relative standards.<\/p>\n

Standard:<\/strong>
\nIEC 62384:2006\/GB\/T 24825<\/a>-2009\u00a0 \u201cDC or AC supplied electronic control gear for LED modules \u2013 Performance requirements\u201d
\nIEC61000-3-2 \u201cLimits for harmonic current emission(equipment input current\u226616A per phase\u201d<\/p>\n

Characteristics:<\/strong>
\n\u2022 This system includes 2 groups (left and right); the 2 groups can work in turn, so that to improve the work efficiency. For example, if the left is on working, then the right can make wire connection.
\n\u2022 It can test 4 LED drivers input and output at one time.
\n\u2022 The equipment can connect with electronic load and LED load, the two difference loads can be fast switch under the control of computer.
\n\u2022 Enable to print out the series number and parameters of sub-quality products by working with a micro-printer,
\n\u2022 Enable to achieve the bar-code record function by working with a bar-code scanner.
\n\u2022 The test report can be saved as Excel file for consult, statistic and analysis purpose.
\n\u2022 Good software interface to freely choose the difference parameters combination, so that to meet different demands. All the parameters can set limit, and with the quality analysis function.<\/p>\n

Specifiche:<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/td>\nTest Range<\/strong><\/td>\nTolerance<\/strong><\/td>\nTest Condition<\/strong><\/td>\n<\/tr>\n
Tensione<\/td>\n\u00a0AC: 3\uff5e300V (CF=1.67)<\/td>\n\u00a0\u00b1(0.1%reading+0.1%range+1digit)<\/td>\n45~65Hz sine-wave Calibration validity: 12 months<\/td>\n<\/tr>\n
\u00a0DC: 3\uff5e500V<\/td>\n<\/tr>\n
Attuale<\/td>\n\u00a0AC: 5mA\uff5e2.7A (CF=3)<\/td>\n<\/tr>\n
\u00a0DC: 5mA\uff5e8A<\/td>\n<\/tr>\n
Potenza<\/td>\n\u00a0AC: 0.015\uff5e800W<\/td>\n<\/tr>\n
\u00a0DC: 0.015\uff5e4000W<\/td>\n<\/tr>\n
Power Factor<\/td>\n\u00a00.000\uff5e1.000<\/td>\n\u00a0\u00b1(0.002+0.001\/reading+1digit)<\/td>\n<\/tr>\n
Frequenza<\/td>\n\u00a045Hz\uff5e65Hz<\/td>\n\u00a0\u00b10.1% Reading<\/td>\n<\/tr>\n
Armonico<\/td>\n\u00a0Total harmonic and 2-11 times harmonic component<\/td>\n\u00a0\u00b1(0.1% range+5% Reading)<\/td>\n<\/tr>\n
Surge Current<\/td>\n\u00a050mA\uff5e100A<\/td>\n\u00a0\u00b1(0.5% range+0.5% range+1digit)<\/td>\nSquare wave with pulse width greater than 10\u03bcs
\nCalibration validity: 12months<\/td>\n<\/tr>\n
Lamp Voltage<\/td>\n\u00a0AC: 3\uff5e300V (CF=1.67)<\/td>\n\u00a0\u00b1(0.1%reading+0.1%range+1digit)<\/td>\n45~65Hz sine-wave Calibration validity: 12moths<\/td>\n<\/tr>\n
\u00a0DC: 3\uff5e500V<\/td>\n<\/tr>\n
Lamp Current<\/td>\n\u00a0AC: 5mA~2.7A (CF=3)<\/td>\n<\/tr>\n
\u00a0DC: 5mA\uff5e8A<\/td>\n<\/tr>\n
Lamp Power<\/td>\n\u00a0AC: 0.015\uff5e800W<\/td>\n<\/tr>\n
\u00a0DC: 0.015\uff5e4000W<\/td>\n<\/tr>\n
Ripple Current<\/td>\n\u00a0Max: 5mA\uff5e8A<\/td>\n\u00a0\u00b1(1%reading+1%range)<\/td>\n20-70kHz sine-wave<\/td>\n<\/tr>\n<\/tbody>\n<\/table>","protected":false},"excerpt":{"rendered":"

ATE-2 LED driver automatic test equipment is applied to the production line for the finished products testing. With features of simplified operation and nice-looking, the workers can operate it at very short time. This system can meet the requirements of IEC62384, GB24825-2009 and other relative standards. Standard: IEC 62384:2006\/GB\/T 24825-2009\u00a0 \u201cDC or AC supplied electronic […]<\/p>\n","protected":false},"author":1,"featured_media":3149,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[182],"class_list":["post-2425","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","tag-ate-2"],"_links":{"self":[{"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/posts\/2425","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/comments?post=2425"}],"version-history":[{"count":0,"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/posts\/2425\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/media\/3149"}],"wp:attachment":[{"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/media?parent=2425"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/categories?post=2425"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ledphotometer.com\/it\/wp-json\/wp\/v2\/tags?post=2425"}],"curies":[{"name":"parola chiave","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}