1.アプリケーション：
このプラグ＆ソケット・テスト・ゲージは、主にプラグとソケットの構造とサイズが、以下の規格に適合しているかどうかを試験・検査するために使用される。 AS/NZS 3112: 2017 standards. And the mainly application industries is electronics, electrical appliances, plugs and sockets and other similar areas.
2.特徴
Gauge dimensions, tolerances, material, hardness, surface roughness conform to the standards requirements;
Material hardness is more than 50HRC; Material thermal expansion coefficient is small,dimensions and tolerances is stable and reliable.
3.仕様
| LISUNモデル | Product Specifications |
| GNGPL-3131 | Depth of No-contact test gauge with AS/NZS 3112 Figure 3.1 |
| GNGPL-3136 | Device for checking the resistance to lateral strain (Three Pin Gauge) with AS/NZS 3112 Figure 3.6 |
| GNGPL-3137 | Device for checking the resistance to lateral strain (Two Pin Gauge) with AS/NZS 3112 Figure 3.7 |
| GNGPL-31A1 | Gauge for three –Pin Flat-Pin Plugs with AS/NZS 3112 Figure A1 |
| GNGPL-31B1 | Gauge for Two-Pin Flat-Pin Flat- Pin Plugs with Parallel Pins with AS/NZS 3112 Figure B1 |
| GNGPL-31C1 | Three-pin test plug with flat pins for full insertion test and the finger test during normal insertion test with AS/NZS 3112 Figure C1 |
| GNGPL-31D1 | Three-pin test plug with flat pins for abnormal insertion test. Figure D1 |
| GNGPL-31F1 | Plugs and socket-outlets for use in extra-low voltage circuits with AS/NZS 3112 Figure F1 |
| GNGPL-31G1 | Three-pin test plug with flat and round pins for the full-insertion test and test finger test during normal insertion test Figure G1 |
JA 
EN 
ES 
RU 
PT 
TR 
AR 
DE 
PL 
IT 
FR 
KO 
ID