RFCI61000-6 Conducted Immunity Test System includes a built-in signal source, a power amplifier and power meter module, a variety of coupling decoupled network (CDN), electromagnetic clamp and current injection clamp developed by external attenuator by LISUN. It is widely used in medical, power, industrial control, new energy charging piles, communication piles and ect for industries.
標準：
IEC61000-4-6/EN61000-4-6 (GB/T17626.6)”Electromagnetic compatibility(EMC)- Part 4-6:Testing and measurement techniques- Immunity to conducted disturbances, induced by radio- frequency fields”
ISO11452-4 “Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy- Part 4:Harness excitation methods”
| Host Configuration | ||
| 出力電圧 | LISUN Model：RFCI61000-6-35W（Output power: 35W） | 1 ～ 17Vrms（CDN method） 1 ～ 11Vrms（Electromagnetic clamping method） |
| LISUN Model：RFCI61000-6-85W（Output power: 85W） | 1 ～ 30Vrms（CDN method） 1 ～ 18Vrms（Electromagnetic clamping method） 1 ～ 10Vrms（Current injection clamping method） | |
| Output impendance | 50Ω | |
| Voltage resident rate | ≤ 1.2 | |
| Output Frequence | 150kHz ～ 230MHz | |
| Harmonic | ＜ 15dBc | |
| Signal source (built-in) | ||
| Frequency | 9k ～ 1GHz | |
| Output level | -60 ～ 10dBm | |
| Non -row signal | Continuous wave | |
| Modulation | A amplitude modulation modulation frequency: 1Hz ~ 10kHz modulation depth: 1 ～ 99% Pulse modulation and modulation frequency: 1Hz ~ 1kHz Lights ratio: 1 to 100% | |
| Power amplifier (built-in) | ||
| Output Frequency | 150kHz ～ 230MHz | |
| Max. output power | LISUN Model RFCI61000-6-35W：+44dBm/35W LISUN Model RFCI61000-6-85W：+49dBm/85W | |
| Harmonic | ＜ 15dBc | |
| Power meter (built-in) | ||
| Input Frequency | 9kHz ～ 3GHz | |
| Input Power | -40dBm ～ +30dBm | |
| Attenuator (built-in) | ||
| Frequency Range： | DC~1GHz | |
| Max. output power： | 100W | |
| Attenuation value： | 6dB | |
Operation (please refer to GB/T17626.6 or IEC61000-4-6: 2014 Terms of Article 7.4.2 Figure 20 to select injection method: CDN method, electromagnetic clamp and current injection clamp method)):
1. The host RFCI61000-6-35W/RFCI61000-6-85W can test the power cables or communications lines with the CDN Coupling Decoupling Network (Optional) of the following models of LISUN:
CDN for RF Conducted Immunity Test
Figure 20 – Rules for selecting the injection method
| Coupling decoupling network type | LISUNモデル | Test Ports | Voltage / Current |
| Power Cables
| CDN-M1-16 | Single -phase single-wire power cable | 220V/16A |
| CDN-M1-32 | Single -phase single-wire power cable | 220V/32A | |
| CDN-M2-16 | Single -phase two-wire power cable | 220V/16A | |
| CDN-M2-32 | Single -phase two-wire power cable | 220V/32A | |
| CDN-M2-100 | Single -phase two-wire power cable | 220V/100A | |
| CDN-M3-16 | Single -phase three-wire power cable | 220V/16A | |
| CDN-M3-32 | Single -phase three-wire power cable | 220V/32A | |
| CDN-M3-100 | Single -phase three-wire power cable | 220V/100A | |
| CDN-M3-32-3 | Three -phase and three-wire power cable (3L) | 380V/32A | |
| CDN-M4-32 | Three -phase and four-wire power cable (3L/1N) | 380V/32A | |
| CDN-M4-100 | Three -phase and four-wire power cable (3L/1N) | 380V/100A | |
| CDN-M4-32-PE | Three -phase and four-wire power cable (3L/1PE) | 380V/32A | |
| CDN-M5-32 | Three -phase and five-wire power cable (3L/1N/1PE) | 380V/32A | |
| CDN-M5-100 | Three -phase and five-wire power cable (3L/1N/1PE) | 380V/100A | |
| Non-shielding symmetrical lines | CDN-T2 | 2 line | 100V/5A |
| CDN-T4 | 4 line | 100V/5A | |
| CDN-T8 | 8 line | 100V/5A | |
| Non -shielding non -symmetrical lines | CDN-AF2 | 2 line | 100V/5A |
| CDN-AF4 | 4 line | 100V/5A | |
| CDN-AF8 | 8 line | 100V/5A | |
| Shield lines | CDN-S8 | 2 line、4 line、8 line | 100V/5A |
| RF conduction antipitrimal coupling degraded network calibration bracket | CDN-CS100 | Coupling decoupling network calibration bracket, which contains 150Ω-50Ω adapter resistance and If you equipped with 1 set of or more sets of CDN, you need to be equipped with at least 1 set of calibration bracket (various CDNs can equipped with it) | |
2. The host RFCI61000-6-35W/RFCI61000-6-85W can work with LISUN AB-EM Electromagnetic Clamp (Optional) to comply with IEC 61000-4-6. It is the immunity to conducted disturbances induced by the detection of radio frequency fields.
Electromagnetic Clamp for RF Conducted Immunity Test
• The maximum injection power is 100W (5 minutes);
• The injection frequency is 150kHz～400MHz;
• Coupling and decoupling direction coefficient greater than 10dB>10MHz
3. The host RFCI61000-6-35W/RFCI61000-6-85W can test any signal lines with LISUN AB-100W (Optional) current injection clamp:
Current Injection Clamp for RF Conducted Immunity Test
• Support any specification signal line test: unshielded balanced line (T2, T4, T8), unshielded unbalanced line (AF2, AF4, AF8), Communication signal line (RJ11, RJ11S, RJ45, RJ45S, USB-C, USB-P) and other signal lines of any specifications
• Support maximum wire diameter: 40mm
• Maximum output power: 100W
• Frequency range: 100KHz~230MHz
• Insertion loss: <7dB
• Standard current clamp calibration parts
JA 
EN 
ES 
RU 
PT 
TR 
AR 
DE 
PL 
IT 
FR 
KO 
ID