1. 애플리케이션:
This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to AS/NZS 3112: 2017 standards. And the mainly application industries is electronics, electrical appliances, plugs and sockets and other similar areas.
2. 기능:
측정 치수, 공차, 재질, 경도, 표면 거칠기는 표준 요구 사항을 준수합니다.;
재료의 경도는 50HRC 이상이며, 열팽창 계수가 작고, 치수 및 공차가 안정적이고 신뢰할 수 있습니다.
3. 사양:
| LISUN 모델 | 제품 사양 |
| GNGPL-3131 | Depth of No-contact test gauge with AS/NZS 3112 Figure 3.1 |
| GNGPL-3136 | Device for checking the resistance to lateral strain (Three Pin Gauge) with AS/NZS 3112 Figure 3.6 |
| GNGPL-3137 | Device for checking the resistance to lateral strain (Two Pin Gauge) with AS/NZS 3112 Figure 3.7 |
| GNGPL-31A1 | Gauge for three –Pin Flat-Pin Plugs with AS/NZS 3112 Figure A1 |
| GNGPL-31B1 | Gauge for Two-Pin Flat-Pin Flat- Pin Plugs with Parallel Pins with AS/NZS 3112 Figure B1 |
| GNGPL-31C1 | Three-pin test plug with flat pins for full insertion test and the finger test during normal insertion test with AS/NZS 3112 Figure C1 |
| GNGPL-31D1 | Three-pin test plug with flat pins for abnormal insertion test. Figure D1 |
| GNGPL-31F1 | Plugs and socket-outlets for use in extra-low voltage circuits with AS/NZS 3112 Figure F1 |
| GNGPL-31G1 | Three-pin test plug with flat and round pins for the full-insertion test and test finger test during normal insertion test Figure G1 |
EN 
ES 
RU 
PT 
TR 
AR 
DE 
PL 
IT 
FR 
KO 
JA 
ID