{"id":2444,"date":"2025-06-19T19:35:47","date_gmt":"2025-06-19T11:35:47","guid":{"rendered":"https:\/\/www.ledphotometer.com\/blog\/ball-pressure-test-device\/"},"modified":"2025-07-01T17:34:51","modified_gmt":"2025-07-01T09:34:51","slug":"ball-pressure-test-device","status":"publish","type":"post","link":"https:\/\/www.ledphotometer.com\/ko\/%ec%a0%9c%ed%92%88\/ball-pressure-test-device\/","title":{"rendered":"IEC60695 Ball Pressure Test Apparatus"},"content":{"rendered":"

The ZBP-T ball pressure test device is designed according to the requirements of the \u201cball pressure test\u201d specified in the following standards. It is mainly used for heat resistance tests on plugs and sockets for household and similar purposes. It is an essential device for manufacturers and quality inspection departments to conduct product quality inspection and control.<\/span><\/span><\/span><\/p>\n

\ud45c\uc900:<\/strong>
\n\u2022\u00a0GB\/T 2099.1-2021\u300a\u5bb6\u7528\u548c\u7c7b\u4f3c\u7528\u9014\u63d2\u5934\u63d2\u5ea7 \u7b2c1\u90e8\u5206\uff1a\u901a\u7528\u8981\u6c42\u300b\u7b2c25.2\u53ca25.3\u6761\u6b3e
\n\u2022 GB 7000.1-2023\u300a\u706f\u5177 \u7b2c1\u90e8\u5206\uff1a\u4e00\u822c\u8981\u6c42\u4e0e\u8bd5\u9a8c\u300b\u7b2c13.2.1\u6761\u6b3e
\n\u2022\u00a0GB\/T 15092.1-2020\u300a\u5668\u5177\u5f00\u5173 \u7b2c1\u90e8\u5206\uff1a\u901a\u7528\u8981\u6c42\u300b\u7b2c21.1\u6761\u6b3e
\n\u2022 GB 16915.1-2024\u300a\u5bb6\u7528\u548c\u7c7b\u4f3c\u7528\u9014\u56fa\u5b9a\u5f0f\u7535\u5668\u88c5\u7f6e\u7684\u5f00\u5173 \u7b2c1\u90e8\u5206\uff1a\u901a\u7528\u8981\u6c42\u300b\u7b2c21\u6761\u6b3e
\n\u2022 GB\/T 17465.1-2022\u300a\u5bb6\u7528\u548c\u7c7b\u4f3c\u7528\u9014\u5668\u5177\u8026\u5408\u5668 \u7b2c1\u90e8\u5206\uff1a\u901a\u7528\u8981\u6c42\u300b\u7b2c24.1\u6761\u6b3e
\n\u2022 IEC 60884-1:2022\u300aPlugs and socket-outlets for household and similar purposes- Part1:General requirements\u300bclause 25.3 and 25.4
\n\u2022 IEC 60598-1:2024\u300aLuminaries-Part1:General requirements and tests\u300bclause 13.2.1
\n\u2022 IEC 61058-1:2018\u300aSwitches for appliances Part1:General requirements\u300bclause 21.1.3-21.1.4
\n\u2022 IEC 60669-1:2017\u300aSwitches for household and similar fixed-electrical installations \u2013 Part1:General requirements\u300bclause 21
\n\u2022 IEC 60320-1:2021\u300aAppliances couplers for household and and similar general purposes- Part1:General requirements\u300bclause 24.1<\/p>\n

\uc0ac\uc591:<\/strong>
\n\u2022 Ball diameter 5mm (R2.5mm)
\n\u2022 Total test pressure: 20N\u00b10.2N
\n\u2022 Sample holder: solid steel cylinder with diameter 50mm and length 100mm
\n\u2022 Production materials: All steel surface electroplating treatment.<\/p>\n

Note: The ball pressure tester should be used with LISUN GW-225 high temperature chamber<\/a>.<\/strong><\/p>\n

Instruction:<\/strong>
\nThe ball pressure test is to press a steel ball (R2.5mm) and a ball pressure tester with a total test of 20N\u00b10.2N on the surface of the test sample in a horizontal state and placed in the heating box, and test it at the specified temperature of the test sample. After 60min+2min\/0min, quickly (<10s) immerse the sample into 20\u2103\u00b15\u2103 water and cool it for 6min. Measure the indentation diameter on the surface of the sample within 3min after taking it out of the water, and evaluate whether the indentation diameter exceeds 2mm. Heat deformation resistance at the specified temperature:<\/p>\n

1. According to the test requirements, first place the ball pressure test device in the temperature chamber for a long enough time to ensure that the ball pressure test device has reached a stable test temperature before starting the test.
\n2. Place the component under test on the support base so that it is in direct contact with the support base.
\n3. Place the surface of the component under test in a horizontal position and press the steel ball against the surface (see figure below). The test should be conducted in a heating box at a temperature specified by the standard.
\n4. After the test reaches the time specified in the standard, remove the ball from the sample. After cooling according to the requirements specified in the standard, measure the diameter of the indentation of the steel ball to determine whether it is qualified.<\/p>\n

\n

\"\"<\/p>\n

IEC 60884-1:2022 Clause 25.3 and 25.4<\/span><\/p>\n<\/div>\n

\n

\"\"<\/p>\n

IEC 60320-1:2018 Clause 24.1<\/span><\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

The ZBP-T ball pressure test device is designed according to the requirements of the \u201cball pressure test\u201d specified in the following standards. It is mainly used for heat resistance tests on plugs and sockets for household and similar purposes. It is an essential device for manufacturers and quality inspection departments to conduct product quality inspection […]<\/p>\n","protected":false},"author":1,"featured_media":3776,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[199],"class_list":["post-2444","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","tag-zbp-t"],"_links":{"self":[{"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/posts\/2444","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/comments?post=2444"}],"version-history":[{"count":0,"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/posts\/2444\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/media\/3776"}],"wp:attachment":[{"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/media?parent=2444"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/categories?post=2444"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ledphotometer.com\/ko\/wp-json\/wp\/v2\/tags?post=2444"}],"curies":[{"name":"\uc6cc\ub4dc\ud504\ub808\uc2a4","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}