The LSP-EMC500VA Programmable AC/DC Testing Power Supply System adopts advanced SPWM technology, DSP digital processing technology, and high-power switch power supply technology, achieving leading domestic and international advanced levels in the field of AC power supply. This series of power supplies are suitable for general commercial products, the power electronics industry, the aviation electronics field, military applications, and regulatory testing. They can be used for testing from the laboratory bench to large-scale production units.

The LSP-EMC500VA Programmable AC/DC Testing Power Supply System supply with excellent power output quality. It can provide precise power inputs for AC loads, DC loads, and rectifier loads by offering AC, DC, and AC+DC power output options.  It is capable of simulating various power disturbances such as voltage surges, voltage sags, short circuits, and voltage fluctuations. Additionally, it can generate waveforms with harmonic or interharmonic components to simulate distorted power waveforms.

In terms of measurement, the LSP-EMC500VA test power supply utilizes state-of-the-art digital signal processing (DSP) technology to provide accurate and fast measurement of power parameters and harmonics. These measurements include root mean square voltage (Vrms), root mean square current (Irms), true power, frequency (Hz), power factor (PF), current crest factor (CF), and measurement of 40th order current harmonic components.

The LSP-EMC500VA test power supply utilizes pulse width modulation (PWM) technology, enabling it to provide a capability of delivering 6 times the peak current, making it the ideal testing instrument for measuring surge currents. This series of AC test power supplies allows for waveform switch-on and switch-off angles to be set for testing surge currents and output maintenance time. It also allows for the setting of voltage and frequency variation rates to scan the input specifications range of the device under test.

The LSP-EMC500VA test power supply, with its multifunctional programmable waveforms, allows users to perform tests according to IEC 61000-4-11, IEC 61000-4-13, IEC 61000-4-14 and IEC 61000-4-28. In addition, the programmable output impedance, when combined with a power analyzer, enables compliance testing with regulations such as IEC 61000-3-2 and IEC 61000-3-3 for harmonic current limitation and flicker. The LSP-EMC500VA test power supply is widely used for the Pre-Compliance test.

Specyfikacja:

Zastosowanie:
1. Extensive Measurement Functionality
The LSP-EMC500VA test power supply is capable of measuring voltage, current, active power, apparent power, reactive power, power factor, current crest factor, peak current, and surge current. It utilizes advanced DSP technology to measure up to 40th order current harmonics. This makes the LSP-EMC500VA not only a power supply but also a power analyzer.

2. Simulate Power Input Interference
In addition to stable voltage output and programmable frequency, the LSP-EMC500VA test power supply also has a powerful capability to simulate various power supply interference conditions. The step output mode and pulse output mode provide a simple and convenient method to perform single-step or continuous output variations. These variations can be triggered by internal operations or external events. With this capability, simulating AC power supply interference conditions such as voltage fluctuations, instantaneous spikes, and short-term interruptions becomes easy.

The sequence mode enhances this ability to cope with more complex waveforms. Up to 100 sequences provide different starting conditions, and can output any waveforms by controlling the volume and DC.

3. Programmable Output Impedance
The LSP-EMC500VA test power supply allows users to program the output impedance. The current feedback control loop causes the output voltage to vary with load changes. This feature is applicable to testing conditions that require special output impedance. It can work with LISUN LS8930 Digital Power Meter (3Phases) to do IEC61000-3-2 and IEC61000-3-3 harmonic and flicker Pre-compliance Testing. It provides users with a simple and effective method to change the reference impedance.

4. High -output current wave factor and starting angle control
The LSP-EMC500VA test power supply features a high output current crest factor (maximum CF=6), providing sufficient transient power. The programmable start/stop angle control allows the LSP-EMC500VA test power supply to perform exceptionally well during surge current testing.

5. Simulation voltage frequency variation testing according to IEC61000-4-11, IEC61000-4-14 and IEC61000-4-28

The LSP-EMC500VA test power supply Supports voltage frequency variation testing according to IEC61000-4-11, IEC61000-4-14 and IEC61000-4-28 Pre-compliance Testing.

6. Harmonic, inter-harmonic synthesis
Traditional AC sources only allow users to superimpose harmonic content in an integer multiple of the distorted waveform. The IEC 61000-4-13 standard requires not only harmonic waveforms but also interharmonic simulation. This means that non-integer multiples of harmonic content need to be superimposed on the fundamental frequency. The LSP-EMC500VA test power supply utilizes advanced DSP technology to synthesize harmonic and interharmonic waveforms. With the help of PC software, non-periodic harmonic distortion waveforms can be outputted to achieve testing according to IEC 61000-4-13.

7. Arbitrary waveform amplification
The LSP-EMC500VA test power supply is capable of amplifying AC+DC waveforms generated by an arbitrary waveform generator. It can be used to simulate waveforms supplied by the main power source in the field.