Bate-papo on-line

+8615317905991

High and Low Temperature & Low Pressure Chamber

Número do produto:

Deixe um recado

=

High and Low Temperature & Low Pressure Chamber

Deixe um recado

=
Descrição do produto

LAP-100A High and Low Temperature Low Pressure Chamber  is mainly used in aviation, aerospace, information, electronics and other fields, to determine the instrumentation, electrical products, materials, parts, equipment in low pressure, high temperature, low temperature single or simultaneous action of the environmental adaptability and reliability test, and at the same time the test sample is turned on for electrical performance parameters measurement.

Padrão:
IEC 60068-2-13 “Environmental testing – Part 2-13: Tests – Test M: Low air pressure”
IEC 60068-2-40 “Basic environmental testing procedures – Part 2-40: Tests – Test Z/AM: Combined cold/low air pressure tests”
IEC 60068-2-41 “Basic environmental testing procedures – Part 2-41: Tests – Test Z/BM: Combined dry heat/low air pressure tests”
ASTM D 6653 “Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method”
ISO 2873 “Packaging Complete, filled transport packages and unit loads Low pressure test”
GB10590 “Specifications for high and low temperature/low air pressure testing chambers”
GB15091 “low temperature low pressure test chamber requirements”
GB11159 “Specification for low air pressure test chambers”
GB/T2423. 25-1992 “Basic environmental testing procedures for electric and electronic products – Test Z/AM: combined cold / low air pressure tests”
GJB150. 2-86 “Environmental test methods for military equipments”

Especificação:

Modelo LISUN LAP-100* LAP-250* LAP-500* LAP-010* LAP-015* LAP-020*
Working Room (cm) 41*55*45  50*60*75  70*80*90 100*100*100 100*100*150 100*100*200
Potência de trabalho 5.5 (KW) 8.0 (KW) 9.0 (KW) 11.0 (KW) 17.0 (KW) 22.0 (KW)
Performance Index Faixa de temperatura A: -20℃~150℃ B: -40℃~150℃ C: -60℃~150℃ D: -70℃~150℃
Temperature Fluctuations ±0.5℃ (Normal Pressure, No-Load)
Uniformidade de temperatura ±2℃ (Normal Pressure, No-Load)
Desvio de temperatura ±3℃ (Normal Pressure, No-Load)
Taxa de aquecimento 1.0~3.0℃/ min (No-Load)
Taxa de arrefecimento 0.7~1.0℃/ min (No-Load)
Gama de pressão Normal Pressure~0.5kPa
Pressure Deviation Normal Pressure~40Kp: ±1.8Kpa; 40Kp~4Kpa: ±4.5%; 4Kp~0.5KPa: ±0.1Kpa
Buck Time ≤60min (Normal Pressure~0.5kPa)
Sistema de controle Controller Imported Color LCD Touch Screen
Accuracy Range Accuracy of temperature: temperature 0.1℃, Indication Accuracy: temperature 0.1℃
Sensor de temperatura Platinum Resistance PT100Ω/MV
Pressure Sensor Electronic Pressure Transmitter
Sistema de aquecimento Fully Independent System, Electrically Heated Nichrome Heater
Sistema de arrefecimento France “TECUMSEH” Fully Enclosed Air-cooled Single-stage / Refrigeration Compressor Cascade Mode
Circulatory System Temperature Resistance and Low-noise Air-conditioning Motors Multi-vane Centrifugal Wind Wheel
Materials of Chamber Outside materials of Chamber Quality Carbon Steel. Phosphate Electrostatic Spray Treatment / SUS304 Stainless Steel Matte Lines Hairline Treatment
Inside materials of Chamber SUS304 Quality Stainless Steel Mirror Light Board
Insulation Material Polyurethane Rigid Foam / Fine Glass Fiber Cotton
Door Insulation Double Resistant to High Temperature Aging Silicone Rubber Door Seal
Security Protection Leakage, Short Circuit, Over Temperature, Motor Overheating, Over-Pressure Compressor, Overload, Over-Current Protection
Time setting Function 0.1~999.9 (H、M、S) Adjustable
Input Power 3Phase/5Wires, AC380V/50Hz (60Hz is option)
Ambient Temperature 5℃~+30℃ ≤85%R.H

Ordering Note: The * in LAP-100* can choose four temperature ranges A/B/C/D. For example: LISUN model LAP-100B where B represents the temperature range of -40℃~150℃. Special working room sizes and temperature ranges can be customized according to customer’s requirements.

pt_PTPT