High and Low Temperature & Low Pressure Chamber

Product No: LAP-100

Leave a Message

Your email address will not be published. Required fields are marked *

Specifications

LAP-100 High and Low Temperature Low Pressure Chamber is according to GB10590 GB15091 low temperature low pressure test chamber requirements; GB11159 low pressure test chamber requirements; GB/T2423. 25-1992 low temperature low pressure integrated chamber requirement; GB/T2423. 26-1992 High temperature low pressure integrated chamber requirement; GJB150. 2-86 low temperature low pressure test etc standards. It’s used in the aviation, aerospace, electronics and other fields, to determine the instrumentation, electrical products, materials, components, equipment etc.

Model	LAP-100	LAP-250	LAP-500	LAP-010
Workroom (mm)	6002.5796	80031003	100041019	100041274
Power	5.5 (KW)	8.0 (KW)	9.0 (KW)	11.0 (KW)
Performance Index	Temperature Range	A: -20℃～150℃ B: -40℃～150℃ C: -70℃～150℃
	Temperature Fluctuations	±0.5℃ (Normal Pressure, No-Load)
	Temperature Uniformity	±2℃ (Normal Pressure, No-Load)
	Temperature Deviation	±3℃ (Normal Pressure, No-Load)
	Heating Rate	1.0～3.0℃/ min (No-Load)
	Cooling Rate	0.7～1.0℃/ min (No-Load)
	Pressure Range	Normal Pressure～0.5kPa
	Pressure Deviation	Normal Pressure～40Kp: ±1.8Kpa; 40Kp～4Kpa: ±4.5％; 4Kp～0.5KPa: ±0.1Kpa
	Buck Time	≤60min (Normal Pressure～0.5kPa)
Control System	Controller	Imported Color LCD Touch Screen
	Accuracy Range	Accuracy of temperature: temperature 0.1℃, Indication Accuracy: temperature 0.1℃
	Temperature Sensor	Platinum Resistance PT100Ω/MV
	Pressure Sensor	Electronic Pressure Transmitter
	Heating System	Fully Independent System, Electrically Heated Nichrome Heater
	Cooling System	France “TECUMSEH” Fully Enclosed Air-cooled Single-stage / Refrigeration Compressor Cascade Mode
	Circulatory System	Temperature Resistance and Low-noise Air-conditioning Motors Multi-vane Centrifugal Wind Wheel
Materials of Chamber	Outside materials of Chamber	Quality Carbon Steel. Phosphate Electrostatic Spray Treatment / SUS304 Stainless Steel Matte Lines Hairline Treatment
	Inside materials of Chamber	SUS304 Quality Stainless Steel Mirror Light Board
	Insulation Material	Polyurethane Rigid Foam / Fine Glass Fiber Cotton
	Door Insulation	Double Resistant to High Temperature Aging Silicone Rubber Door Seal
Security Protection		Leakage, Short Circuit, Over Temperature, Motor Overheating, Over-Pressure Compressor, Overload, Over-Current Protection
Time setting Function		0.1～999.9 (H、M、S) Adjustable
Input Power		AC380V ±10％ 50 ±0.5Hz 3Phase/5Wires
Ambient Temperature		5℃～＋30℃ ≤85％R.H
Note: 1. The above figures are at ambient temperature (QT) 25 ℃. Under no-load conditions measured studio. 2. Can be customized non-standard high-low temperature and low pressure test chamber according to the customer’s specific requirements.

Related Products

IEC60068 Temperature and Humidity Environmental Test Chamber

High and Low Temperature & Low Pressure Chamber

Leave a Message

Specifications

Related Products

IEC60068 Temperature and Humidity Environmental Test Chamber

IEC60529 Waterproof tester

Dustproof Testing Machine