High Frequency Power Supply

Product No: HFP-800

Leave a Message

Your email address will not be published. Required fields are marked *

7+4 =


The HFP-800 High Frequency Power Supply works with LPS-3 (Lamp Preheat Assistant Source) and RB-3 (Adjustable Resistance Ballast) to be an IEC Standard Test System which used to test the high frequency fluorescent Lamp such as T5 Tube. Please visit this page to view How to Measure the High Frequency Fluorescent Lamp. It is fully meet the ANSI-ANSLG-C78.81, ANSI-ANSLG-C82.11, IEC62776 , GB/T-15144 Standard.

• Program control output voltage and easy operation
• Set data easily with a memory chip, unnecessary to set for many times
• Display on four windows, each window shows one parameter independently
• Application for all kinds fluorescent lamps such as 50Hz/60Hz T8/T12 tube or 25KHz T5 Tube
• It is according to double-ended fluorescent lamps adoptting the IEC 60081 (GB/T10682) and the single-ended fluorescent lamps adoptting the IEC 60901 (GB/T17262)

• Range for output voltage: 10~600V (Adjustable)
• Range for output current: 0~0.600A
• Range for output frequency: 25KHz
• Range for output capacity: 0~300W (Special request to 500W)
• Range for Voltage stability: 0.5%/30 minutes
• Range for frequency stability: 0.02%



HFP-800 Calibrate Certificate ANSI-ANSLG-C78.81 2013 Standard Free Download ANSI-ANSLG-C82.11 2011 Standard Free Download ANSI-C78.81 2010 Standard Free Download ANSI-C78.81 2014 Standard Free Download IEC60081 2002 Standard Free Download IEC62776 2014 Standard Free Download GB/T-10682 2002 Standard Free Download GB/T-15144 2005 Standard Free Download GB/T-17262 2002 Standard Free Download IESLM-79-LM-80 Chinese Version Free Download


HFP-800 High Frequency power supply and RB-3 Adjustable Resistance Ballast for High Frequency Fluorescent Lamp Test