Basic Introduction
Angles Gloss Meter is mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter meets the requirement of DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on.
Instrument Introduction
• Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure highly precise of the measured data. Our gloss meters conform to JJG 696 standard for first class gloss meters. Every machine has metrology accreditation certificate from National Institute Of Quality Inspection and Research center
• Every gloss meter made by Lisun has done the following test: 412 calibration tests; 43200 stability tests; 110 hours of accelerated aging test; 17000 vibration test
• The shell is made by Dow Corning Ti SLV material, a desirable elastic material. It is resistant to UV and bacteria and do not cause allergy. This design is for better user experience.
• Download
Technical Parameters
Model | AGM-580 | |
Test Angle | 20°、60°、85° | |
Test light spot(mm)) |
20°: 10*1060°: 9*15 85°: 5*38 |
|
Test range |
20°: 0-2000GU60°: 0-1000GU 85°: 0-160GU |
|
Resolution | 0.1GU | |
Test modes | Simple mode, standard mode and sample testing mode | |
Repeatability | 0-100GU: 0.2GU100-2000GU: 0.2%GU | |
Accuracy | Conform to JJG 696 standard for first class gloss meter | |
Test time | Less than 1s | |
Data storage | 100 standard samples; 10000 test samples | |
Size(mm) | 165*51*77 (L*W*H) | |
Weight | About 400g | |
Language | Chinese and English | |
Battery capacity | 3000mAh lithium battery | |
Port | USB, Bluetooth (optional) | |
Upper-PC Software | Include | |
Working Temperature | 0-40℃ | |
Working Humidity | <85%, no condensation | |
Accessories | 5V/2A charger, USB cable, operating manual, software CD, calibration boards, metrology accreditation certification |
© Copyright 2003-2020. All Rights Reserved