+8618917996096

Waterproof test chambers for small electronic and electrical products

Product No: JL-XC

Leave a Message

Your email address will not be published. Required fields are marked *

7+4 =

Specifications

JL-XC series waterproof test chambers are mainly used for small electronic and electrical products such as lamps, electrical cabinets, electrical components and so one. It is used for physical and other related properties checking under simulated climatic conditions. It determines whether the performance of the product meets the requirements or not after the test. It is very useful in the design, improvement, verification and factory inspection of the product. The JL-XC fully meets IEC60598-1IEC60529:1989 +A1:1999 +A2:2013 《Degrees of protection provided by enclosures(IP Code)》, GB4208-2008 and GB7000.1.

Features:
• The outer casing is made of high-quality steel plate, and the surface is painted with paint which is beautiful and durable. The inner box, the turntable, and the wading part are all made of SUS304 stainless steel plate to make sure that it will not rust after using for a long time. (Inner box sheet thickness: 1.2mm, can handle the water pressure)
• IPX12: The compressed air drying function can remove the excess water in the drip tank after the test to avoid long-term water accumulation and fouling. (User need to provide air compressor)
• IPX34: The driver for the swing pipe adopts high-quality servo stepping motor, the swinging speed and angle are precisely adjustable. There is no out-of-step problem (the risk of out-of-step: it will cause the swinging tube to malfunction, hitting the middle turntable shaft, causing equipment damage)
• IPX56: It is with monolithic structure. The sray gun direction is adjustable and can be fixed. The operator only need to start the test but no need to carry the spray gun.
• The water supply line is equipped with a filter to filter impurities in the water to prevent nozzle clogging.
• The LED waterproof lighting is installed in the chamber, and there is a large observation window on the door to facilitate the observation of the test sample.
• The equipment equipped with a water tank for recycling water, no need building a professional waterproof test room. The water tank float valve in the water tank automatically controls the water inlet, and has high and low water level alarm monitoring to effectively prevent the pump from being damaged due to running out of water.
• The turntable uses a stepper motor, the speed can be set on the touch screen, and can control the forward and reverse rotation (suitable for the sample power-on test to prevent winding).
• Touch screen control function: Directly select the waterproof level on the self-developed IPX waterproof level test operation interface. You can run test according to the waterproof rating conditions in the standard terms easily.
• Test sample input power: single-phase 220V/10A (other specifications can be customized)
• Equipment power supply frequency: Default is 50Hz and 60Hz is also available (It is very important to confirm us your grid power frequency) 

Specifications

Model JL-12CP-600M JL-12CP-1200M
Test Level IPX1,IPX2
Drip size 600*600mm 1200*1200mm
Drip aperture ¢0.4mm
Distance between drip holes 20*20 mm
Turntable diameter ¢600 mm
Flow 1-5 mm/min(±0.5mm/min)
Flow adjustment method Manual adjust
Drip board lifting method Not lifting (Fixed)
Turntable height range 350-700 mm
Turntable maximum load bearing 50KG
Turntable tilt 0°or15°(horizontal direction)
Turntable speed 1 r/min(IPX1)
Test time 0-999 min
Security function Leakage protection, water shortage protection, short circuit protection
Equipment power supply 380V/Three-phase/50Hz (60Hz customizable)
Model JL-34CP-R200 JL-34CP-R400 JL-34CP-R600
Test Level IPX3,IPX4
Swing tube size R200mm R400mm(Can be added R200mm swing tube) R600mm(Can be added R400mm, R200mm swing tube)
Inner box size 500*500*500mm 900*900*900mm 1300*300*1300mm
Water jet aperture size 0.4mm
Swing tube inner diameter 15mm
Turntable diameter 200mm 400mm 600mm
Flow 0-1L/min 0-2L/min 0-3L/min
Turntable Maximum load bearing 50kg
Turntable height range 150-250mm 350-600mm 550-1000mm
Turntable rotation speed 1-5r/min(Precision adjustable)
Turntable rotation Always forward / Forward and reverse alternate
Pendulum angle 120º(IPX3),350º(IPX4)Or custom settings
Swing tube Swing speed 240°back and forth 4S,720°back and forth 12S(Precision control) or custom settings
Security function Leakage protection, water shortage protection, short circuit protection
Equipment power supply 220V/Single Phase/50Hz(60Hz customizable)
Model JL-56CP-200L JL-56CP -500L JL-56CP -1000L JL-56CP -1400L
Test Level IPX5,IPX6
Inner box size 600*600*600mm 800*800*800 mm 1000*1000*1000mm 1180*1180*1000mm
Water tank volume about100L
Turntable size ¢400mm ¢600mm ¢600mm ¢800mm
IPX5 Water spray aperture ¢6.3mm
IPX6 Water spray aperture ¢12.5mm
IPX5 Water spray flow 12.5±0.625(L/min)
IPX6 Water spray flow 100±5(L/min)
Flow adjustment method Manual adjust (Rotor flowmeter)
Water spray distance 2.8m
Spray gun fixing method Mechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-56CA series)
Turntable maximum load bearing 50KG
Turntable lifting range Not lifting (Fixed)
Water spray method Recyclable
Security function Leakage protection, water shortage protection, short circuit protection
Equipment power supply 380V/Three-phase/50Hz (60Hz customizable)
Model JL-1234CP -R200 JL-1234CP -R400 JL-1234KCP-R400
Test Level IPX1,IPX2,IPX3, IPX4 IPX1,IPX2,IPX3, IPX4, IPX4K
Inner box size 500*500*650mm 900*900*1050mm 900*900*1050mm
Turntable size ¢200mm ¢400mm
Turntable maximum load bearing 50KG
Turntable height range 150-250 mm 450-750 mm
Turntable tilt 0°or15°(horizontal direction)
Turntable speed 1 -5r/min(Precision adjustable)
Turntable rotation Always forward / Forward and reverse alternate / intermittent rotation
Test time 0-999 min
IPX12 part – technical parameters
Drip size 200*200mm 600*600mm
Drip aperture ¢0.4mm
Distance between drip holes 20*20 mm
Flow IPX1=1mm/min;IPX2=3mm/min
Flow adjustment method Manual adjust
Drip board lifting method Can not lifting (fixed)
IPX34 part – technical parameters
Swing tube size R200mm R400mm(Can be added R200mm swing tube)
Pendulum flow IPX3=0.56L/min;IPX4=0.84L/min IPX3=1.1L/min;IPX4=1.8L/min;IPX4K=15L/min
Water jet aperture size 0.4mm 0.8mm
Water spray aperture spacing 50mm
Swing tube inner diameter 15mm
Pendulum angle 120º(IPX3),350º(IPX4)Or custom settings
Swing tube Swing speed 240°back and forth 4S,720°back and forth 12S (precise control) or custom
Security function Leakage protection, water shortage protection, short circuit protection
Equipment power supply 380V/Three-phase/50Hz (60Hz customizable)

 

Model JL-3456CP-R400 JL-3456CP-R600 JL-3456CP-R800
Test Level IPX3, IPX4, IPX5, IPX6
Turntable diameter 400mm R600mm R800mm
Turntable maximum load bearing 50KG
Turntable lifting height 400-750mm 550mm—1100mm  
Turntable speed 1-5r/min(accurately adjustable)
Turntable tilt 0°or15°(horizontal direction)
Turntable rotation Always forward / forward and reverse alternate / intermittent rotation
Flow adjustment method Manually adjust
Test time 0-999min
IPX34 technology parameters
Swing tube size R400mm(Can be added R200mm swing tube) R600mm(Can be added R400/R200mm swing tube) R800mm(Can be added R600/R400/R200mm swing tube)
Pendulum flow IPX3=1.1L/min;IPX4=1.8L/min
Water jet aperture size 0.4mm
Water spray aperture spacing 50mm
Swing tube inner diameter 15mm
Pendulum angle 120°(IPX3),350°(IPX4) or custom settings
Swing tube Swing speed 240°back and forth 4s,720°back and forth 12s(precise control) or custom
IPX56 Technical Parameters
IPX5 Water jet aperture ¢6.3mm
IPX6 Water jet aperture ¢12.5mm
Water spray distance 2.5m(the distance from the nozzle to the center of the turntable)
IPX5 Water spray flow 12.5±0.625(L/min)
IPX6 Water spray flow 100±5(L/min)
Flow adjustment method manual adjust
Spray gun fixing method Mechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-3456CA series)
Equipment power supply 380V/Three-phase/50Hz (60Hz customizable)

 

Model JL-123456CP-R400 JL-123456CP-R600
Test level IPX1, IPX2, IPX3, IPX4, IPX5, IPX6
Turntable diameter 400mm 600mm
Turntable maximum load bearing 50KG
Turntable lifting height 400-750mm 550mm—1100mm
Turntable speed 1-5r/min(accurately adjustable)
Turntable tilt 0°or15°(horizontal direction)
Turntable rotation Always forward / forward and reverse alternate / intermittent rotation
Flow adjustment method Manually adjust
Test time 0-999min
IPX12 Technical Parameters
Drip size 600*600mm
Drip aperture ¢0.4mm
Distance between drip holes 20*20mm
Flow IPX1=1mm/min;IPX2=3mm/min
Flow adjustment method Manually adjust
Drip board lifting method Can not lifting (fixed)
IPX34 Technical Parameters
Swing tube size R400mm(Can be added with R200mm swing tube) R600mm(Can be added with R400/R200mm swing tube)
Pendulum flow IPX3=1.8L/min;IPX4=2.6L/min
Water jet aperture size 0.4mm
Water spray aperture spacing 50mm
Swing tube inner diameter 15mm
Pendulum angle 120°(IPX3),350°(IPX4) or custom settings
Swing tube Swing speed 240°back and forth 4s,720°back and forth 12s(precise control) or custom
IPX56 Technical Parameters
IPX5 Water jet aperture ¢6.3mm
IPX6 Water jet aperture ¢12.5mm
Water spray distance 2.5m(the distance from the nozzle to the center of the turntable)
IPX5 Water spray flow 12.5±0.625(L/min)
IPX6 Water spray flow 100±5(L/min)
Flow adjustment method Manual adjust (Rotor flowmeter)
Spray gun fixing method Mechanically fixed and can adjust the angle of the gun manually (if need to automatically swing the spray gun, please order JL-123456CA series)
Equipment power supply 380V/Three-phase/50Hz (60Hz customizable)

Download

JL-56 Calibrate Certificate. IEC60598-1-2003 A1-2006 Standard Free Download EC60529:1989 +A1:1999 +A2:2013 《Degrees of protection provided by enclosures(IP Code)》Standard Free Download GB4208-2008 Standard Free Download GB7000.1-2015 Standard Free Download

video

Waterproof Test Chamber for IPX5 and IPX6

vedio